DE
English
polski
русский
українська
Fog Lamp Assembly 5NL-941-699
Verfügbar in Shops 8 Angebote
Fahrzeug-Passgenauigkeit 33 Fahrzeuge
Technische Daten
| OEM Part Number | 5NL 941 699 |
|---|---|
| Position | Left / Driver Side |
| Assembly Type | Fog Lamp Assembly (complete) |
| Weight | Approximately 6.70 lbs |
| Engine Application | 2.0L L4 Gasoline |
| Bulb Type | Halogen or LED (vehicle configuration dependent) |
| Connector Type | Standard Volkswagen fog lamp electrical connector |
| Material | Automotive-grade exterior lighting materials |
| Dimensions | — |
| Vehicle Application | 2018–2022 Volkswagen Tiguan (All Trims) |
So ersetzen Sie Fog Lamp Assembly
Replacing the left fog lamp assembly on a 2018–2022 Volkswagen Tiguan is a moderate DIY task requiring basic hand tools. Always disconnect the battery before working on any electrical lighting component, and refer to your vehicle's official service manual for torque specifications and model-specific access procedures.
-
Prepare the Vehicle
Park the vehicle on a flat, level surface and turn off the ignition. Allow the vehicle to cool if the fog lamps were recently used. Gather required tools: screwdrivers, trim removal pry tools, and a socket set.
-
Disconnect the Negative Battery Terminal
Open the hood and disconnect the negative (–) battery terminal using the appropriate wrench. This prevents accidental electrical shorts or airbag deployment during the repair.
-
Access the Fog Lamp Assembly
Depending on your trim level, you may need to remove the front bumper lower fascia cover or access panel beneath the headlights to reach the fog lamp housing. Use plastic trim removal tools to avoid scratching painted surfaces.
-
Disconnect the Electrical Connector
Locate the wiring harness connector attached to the back of the fog lamp assembly. Press the locking tab and firmly pull the connector straight back to disengage it from the lamp socket.
-
Remove the Fog Lamp Assembly
Remove the mounting screws or bolts securing the fog lamp assembly to the bumper bracket. Carefully pull the assembly forward and out of its housing, taking care not to damage surrounding trim or wiring.
-
Install the New Fog Lamp Assembly
Position the new 5NL941699 fog lamp assembly into the mounting housing. Align the mounting holes and hand-tighten the screws or bolts before torquing to the manufacturer's specification (refer to VW service manual). Reconnect the electrical connector until it clicks securely.
-
Reassemble and Test
Reinstall any trim panels, access covers, or fascia components that were removed. Reconnect the negative battery terminal, then turn on the fog lamps to verify the new assembly illuminates correctly and is aimed properly.
Anzeichen für ein verschlissenes Teil
-
Fog Lamp Fails to Illuminate
The most common failure sign — the left fog lamp does not turn on when activated via the dashboard switch, indicating a burnt bulb, failed assembly, or broken wiring connection.
-
Cracked or Shattered Lens
Physical damage to the lens housing from road debris or minor impacts allows moisture and dirt to enter the assembly, degrading light output and potentially causing electrical faults.
-
Moisture or Condensation Inside Lens
Water infiltration through a failed seal or cracked housing causes fogging inside the lens. This reduces light output and can corrode the bulb socket or internal reflector over time.
-
Flickering or Intermittent Light Output
A fog lamp that flickers or cuts in and out may indicate a failing bulb, a loose electrical connector, or internal corrosion within the lamp assembly's socket contacts.
-
Dim or Yellowed Light Output
A noticeably dim beam or yellowed/hazy lens significantly reduces visibility effectiveness in fog and rain, indicating the assembly has aged or the reflector coating has degraded.
Wechselintervalle
Fog lamps are not part of the standard VW scheduled maintenance program. Replacement is condition-based. If the fog lamp warning indicator illuminates on the instrument cluster, diagnose promptly to avoid a failed inspection or reduced safety in low-visibility driving conditions.
Häufig gestellte Fragen
Is part number 5NL941699 for the left side or the right side?
Part number 5NL941699 is specifically for the left (driver's) side fog lamp assembly. The right (passenger's) side uses a different part number. Always confirm which side is damaged before ordering.
Which Volkswagen Tiguan years and trims does this fog lamp fit?
This assembly is compatible with 2018–2022 Volkswagen Tiguan models across all trims — including S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, and SEL R-Line Jet Black — all with the 2.0L L4 gasoline engine.
Can I replace just the bulb inside the fog lamp, or do I need the full assembly?
If the housing, lens, and mounting tabs are undamaged and only the bulb has failed, you can typically replace just the bulb. However, if the lens is cracked, moisture has entered, or the housing is broken, the full 5NL941699 assembly should be replaced.
Is this a genuine OEM Volkswagen part or aftermarket?
Part number 5NL941699 is a genuine Volkswagen OEM part. It is manufactured to factory specifications and is the same component installed on the vehicle during original production. Aftermarket alternatives may fit but are not manufactured by Volkswagen.
Do I need any special tools to replace this fog lamp assembly?
Basic hand tools are sufficient for most technicians — a socket set, screwdrivers, and plastic trim removal pry tools are the primary requirements. No specialized diagnostic equipment is needed for a straightforward swap, though a scan tool is recommended afterward to clear any stored fault codes.
Will this fog lamp assembly include a bulb, or is the bulb sold separately?
OEM fog lamp assemblies from Volkswagen may or may not include a bulb depending on the supplier. Confirm with your parts source at the time of purchase whether a bulb is included, and verify the correct bulb type for your specific vehicle configuration (halogen or LED).
Fehler gefunden?
Helfen Sie uns, besser zu werden — wenn Sie einen Fehler auf der Website oder in den Daten entdeckt haben, teilen Sie uns dies mit, und wir beheben ihn so schnell wie möglich.