RU
Deutsch
English
polski
українська
Mirror Glass 5C6-857-522-Q
Доступно в магазинах 5 предложений
Совместимость с автомобилями 42 автомобиля
Технические характеристики
| OEM Part Number | 5C6-857-522-Q |
|---|---|
| Side | Right (Passenger) |
| Material | Standard automotive mirror glass |
| Blind Spot Detection Compatible | Yes |
| Heated Glass | Yes (connector present) |
| Width | — |
| Height | — |
| Mounting Style | Clip-in retaining clips |
| Finish | Standard reflective glass |
| Brand | Genuine Volkswagen |
Как заменить Mirror Glass
Replacing the right-side mirror glass on compatible Volkswagen Beetle and Jetta models is a straightforward DIY procedure requiring only basic trim tools. No special torque specifications are needed. Allow approximately 20–30 minutes and ensure the vehicle is parked safely before starting.
-
Adjust Mirror to Access Gap
Using the interior mirror adjustment control, move the mirror glass to its innermost (fully folded or angled) position to expose a gap between the glass and the mirror housing.
-
Gather Tools and Protect Surfaces
Prepare a plastic trim removal tool and protective gloves. Optionally, tape the edge of the mirror housing with masking tape to prevent scratches during removal.
-
Insert Trim Tool Into Gap
Carefully insert the plastic trim removal tool into the gap between the mirror glass and the housing. Work slowly around the perimeter to avoid cracking the glass or damaging retaining clips.
-
Release Retaining Clips and Remove Glass
Gently pry and flex the mirror glass away from the housing, releasing the retaining clips one at a time. Support the glass to prevent it from falling once clips release.
-
Disconnect Electrical Connectors
Once the glass is free, carefully disconnect any electrical connectors attached to the back of the glass, including those for the heating element and blind spot detection system.
-
Connect Connectors to New Glass
Plug all electrical connectors into the corresponding ports on the back of the new 5C6-857-522-Q mirror glass. Ensure each connector clicks securely into place.
-
Seat and Secure New Mirror Glass
Align the new mirror glass with the housing, ensuring all clip positions are correctly lined up. Press firmly and evenly around the perimeter until all retaining clips click into place.
-
Test All Functions
Turn on the ignition and test the mirror heating and blind spot detection indicator light to confirm all electrical connections are functioning correctly before driving.
Признаки износа детали
-
Cracked or Chipped Glass
Visible cracks, chips, or shattered sections in the mirror surface obstruct the driver's view and can create sharp hazards during normal mirror adjustment.
-
Distorted or Unclear Reflection
A warped, hazy, or discolored reflection indicates that the glass coating has deteriorated, reducing the driver's ability to accurately judge distances in the passenger-side lane.
-
Inoperative Heating Element
Failure of the mirror de-icing or defogging function in cold or wet weather suggests the heating element in the glass has failed, requiring mirror glass replacement.
-
Blind Spot Detection Warning Light Fault
If the blind spot detection indicator in the mirror stops illuminating or triggers fault codes, a damaged mirror glass with a compromised BSD sensor passthrough connector may be the cause.
-
Glass Detached or Loose in Housing
If the mirror glass shifts, vibrates excessively, or has partially detached from the housing, one or more retaining clips have failed and the glass should be replaced before it falls out entirely.
Периодичность замены
There is no manufacturer-scheduled replacement interval for mirror glass. Replacement is condition-based. Always replace immediately if cracks impair visibility or if the glass poses a safety hazard.
Часто задаваемые вопросы
Is part number 5C6-857-522-Q the right side or left side mirror glass?
The 5C6-857-522-Q is the right side (passenger side) mirror glass. If you need the driver's (left) side, you will need a different part number. Always confirm the side before ordering.
Will this mirror glass work if my vehicle has blind spot detection?
Yes. This OEM part is specifically designed to be compatible with vehicles equipped with blind spot detection and driver assistance systems. It includes the appropriate electrical connector passthrough for the BSD sensor.
What Volkswagen models is the 5C6-857-522-Q compatible with?
This mirror glass is compatible with certain Volkswagen Beetle (2012–2019) and Volkswagen Jetta (2011–2018) models across multiple trims. Always verify compatibility using your vehicle's VIN or consult an official VW parts catalog.
Can I install this mirror glass myself without professional help?
Yes, for most DIYers this is a manageable replacement requiring only a plastic trim removal tool and gloves. No special torque values are required. However, if your vehicle has blind spot detection, ensure all connectors are securely reconnected and tested after installation.
What is the difference between suffix -Q and suffix -K (5C6857522K)?
The suffix letters in Volkswagen OEM part numbers often indicate a revision or production update. The -K and -Q variants are both right-side mirror glasses for compatible models, but compatibility may differ slightly by production date or trim. Cross-reference your VIN with an official VW parts dealer to confirm the correct suffix for your vehicle.
Is this an OEM part or aftermarket, and does it matter?
The 5C6-857-522-Q is a genuine OEM Volkswagen part. OEM is recommended over aftermarket when blind spot detection is involved, as aftermarket alternatives may not reliably support the BSD sensor connector, potentially causing system faults or warning lights.
Нашли ошибку?
Помогите нам стать лучше — если вы заметили ошибку на сайте или в данных, сообщите нам, и мы исправим её как можно скорее.