PL
Deutsch
English
русский
українська
Wiper Motor Assembly 5N0-955-711-B
Dostępne w sklepach 10 ofert
Dopasowanie do pojazdu 34 pojazdy
Specyfikacja techniczna
| OEM Part Number | 5N0-955-711-B |
|---|---|
| Operating Voltage | 12V DC |
| Installation Location | Rear hatch / tailgate |
| Material | Metal and plastic composite |
| Primary Fitment | Volkswagen Tiguan 2009–2017 |
| VAG Brand Coverage | VW, Audi, SEAT, Škoda, Porsche, Cupra |
| Connector Type | OEM direct plug-in |
| Dimensions (L × W × H) | — |
| Weight | — |
| Replacement Type | Condition-based (no fixed interval) |
Jak wymienić Wiper Motor Assembly
Replacing the rear wiper motor on the Volkswagen Tiguan is a straightforward DIY-level job requiring basic hand tools. Always disconnect the battery before beginning electrical work, and consult your vehicle's service manual for model-specific torque values.
-
Disconnect the Battery
Open the hood and disconnect the negative terminal of the 12V battery to eliminate any risk of electrical shorts or unintended wiper activation during the repair.
-
Open the Rear Hatch
Open the tailgate fully to gain unobstructed access to the interior of the rear hatch area where the wiper motor is mounted.
-
Remove the Interior Trim Panel
Using a trim removal tool, carefully pry off the interior trim panel on the rear hatch. Release all retaining clips without cracking the panel, then set it aside safely.
-
Disconnect the Electrical Connector
Locate the wiring harness connector on the wiper motor. Press the release tab and pull the connector straight out to disconnect it from the motor.
-
Unbolt and Remove the Old Motor
Remove the mounting bolts securing the wiper motor to the hatch. Carefully detach the wiper arm from the motor shaft, then extract the old motor assembly from the hatch.
-
Install the New Motor
Position the new 5N0-955-711-B motor assembly into the mounting location. Secure it with the mounting bolts tightened to the manufacturer's specified torque, then reattach the wiper arm ensuring correct alignment on the shaft.
-
Reconnect Electrical Connector and Trim
Plug the wiring harness connector back into the new motor until it clicks. Reinstall the interior trim panel by pressing all retaining clips back into their seats.
-
Test the Wiper Operation
Reconnect the battery negative terminal, then activate the rear wiper through the vehicle controls. Confirm the wiper sweeps the full intended arc smoothly and without unusual noise.
Oznaki zużycia części
-
Rear Wiper Completely Inoperative
The rear wiper does not move at all when switched on, indicating the motor may have failed electrically or mechanically.
-
Unusual Grinding or Clicking Noises
Grinding or clicking sounds during wiper operation suggest worn internal gears or a damaged motor armature that requires replacement.
-
Erratic or Sluggish Wiper Movement
The wiper moves inconsistently, pauses mid-sweep, or runs significantly slower than normal, pointing to a failing motor or power supply issue.
-
Incomplete Wiper Sweep
The wiper arm stops before completing its full arc, leaving portions of the rear window uncleared and reducing rearward visibility.
-
Moisture or Corrosion on Motor Housing
Visible water ingress or rust on the motor housing can cause internal short circuits and motor failure, and requires immediate attention.
Częstotliwość wymiany
The rear wiper motor is a condition-based replacement item with no manufacturer-specified service interval. Prompt replacement at first sign of failure prevents loss of rear visibility in poor weather.
Najczęściej zadawane pytania
What vehicles is the 5N0-955-711-B compatible with?
This motor is primarily compatible with the Volkswagen Tiguan from model years 2009 through 2017, across trims including S, SE, SEL, R-Line, Sport, and Wolfsburg Edition. Always verify your vehicle's exact production date and configuration before purchasing.
Is 5N0955711B used on Audi or SEAT models as well?
Yes. The part number is cross-referenced across multiple Volkswagen Group brands including Audi, SEAT, Škoda, Porsche, and Cupra, as these platforms share common components. Confirm fitment against your specific model's parts diagram.
Are aftermarket alternatives reliable for this motor?
Reputable aftermarket brands such as AD Kühner, AIC, ALANKO, AUTOMEGA, BLIC, and BOGAP produce direct equivalents designed to meet or exceed OEM specifications. Choosing a well-known European aftermarket supplier reduces the risk of premature failure.
Can I install this rear wiper motor myself?
Yes, with basic mechanical skills and hand tools this is a DIY-friendly replacement. The key steps involve disconnecting the battery, removing the rear hatch trim panel, swapping the motor, and reconnecting the wiring. If you are unsure, consulting a professional technician is recommended.
How do I know if my rear wiper motor needs replacing versus another issue like a blown fuse?
Before replacing the motor, check the rear wiper fuse and relay in the fuse box, and verify the wiring connector is seated correctly. If power reaches the motor but it still does not operate, the motor itself has likely failed and requires replacement.
Does the new motor come with a wiper arm, or do I reuse my existing one?
The 5N0-955-711-B is a motor assembly only and does not include the wiper arm or blade. You will reuse your existing wiper arm unless it is also damaged, in which case it should be replaced separately.
Znalazłeś błąd?
Pomóż nam się rozwijać — jeśli zauważyłeś błąd na stronie lub w danych, daj nam znać, a naprawimy go jak najszybciej.