UK
Deutsch
English
polski
русский
Accessory Drive Belt Tensioner Assembly 03H-145-299-B
Доступно в магазинах 3 пропозиції
Сумісність з автомобілями 3 автомобілі
| Рік | Марка | Модель | Кузов і комплектація | Двигун | |
|---|---|---|---|---|---|
| 2009 | Volkswagen | Touareg | Base | 3.6L V6 - Gas | |
| 2008 | Volkswagen | Touareg | Base | 3.6L V6 - Gas | |
| 2007 | Volkswagen | Touareg | Base | 3.6L V6 - Gas |
Технічні характеристики
| OEM Part Number | 03H145299B |
|---|---|
| Part Type | Belt Tensioner Damper |
| Brand Group | Volkswagen Group |
| Compatible Engine Sizes | 3.2L V6, 3.6L V6 |
| Compatible Makes | Volkswagen, Audi, Porsche, SEAT, Škoda |
| Compatibility Years | 2004–2014 (varies by model) |
| Material | — |
| Thread Size | — |
| Weight | — |
| Dimensions | — |
Як замінити Accessory Drive Belt Tensioner Assembly
Replacing the belt tensioner damper on VW Group 3.2L/3.6L V6 engines is a moderate-difficulty job. Allow the engine to cool fully before beginning. Have the accessory belt routing diagram on hand — it is often printed on a sticker under the hood or available in the vehicle's service manual. On some 2008 Touareg applications, also inspect the idler pulley (022-145-276A) and water pump pulley (021-121-031D) for wear, as these are commonly replaced at the same time.
-
Safety Preparation
Disconnect the negative terminal of the vehicle battery and ensure the engine is fully cool before beginning work. Engage the parking brake and secure the vehicle on a level surface.
-
Remove Obstructing Components
Remove any engine covers, intake ducts, or splash shields that block access to the accessory belt tensioner. On the Touareg and Cayenne this may include the upper engine cover panel.
-
Note the Belt Routing
Before removing the belt, photograph or sketch the existing belt routing around all pulleys. Cross-reference with the routing diagram in the service manual to confirm correct reinstallation path.
-
Relieve Belt Tension and Remove Belt
Using the correct breaker bar or tensioner tool, rotate the tensioner arm to relieve tension on the accessory belt. Carefully slide the belt off the pulleys and set it aside for inspection or replacement.
-
Unbolt and Remove the Old Tensioner Damper
Remove the mounting bolt(s) securing the tensioner damper to the engine block. Extract the tensioner from the engine bay, taking care not to damage surrounding components or hose connections.
-
Install the New Tensioner Damper
Position the new 03H145299B tensioner damper onto the mounting point. Thread in the mounting bolt(s) by hand first, then tighten to the manufacturer's specified torque value as listed in the vehicle's service manual.
-
Reinstall the Accessory Belt
Route the belt over all pulleys following the belt routing diagram. Rotate the tensioner arm to allow the belt to slip into place, then gently release the tensioner to apply correct tension to the belt.
-
Final Inspection and Test
Confirm the belt is properly seated and centered on all pulleys. Reinstall all removed covers and components, reconnect the battery, then start the engine and listen for unusual noises. Verify all accessories operate correctly.
Ознаки зношеної деталі
-
Squealing or Grinding Noise
Unusual squealing, chirping, or grinding sounds from the front of the engine near the belt area are a primary indicator that the tensioner damper or associated components need inspection.
-
Visible Wear or Damage
Physical inspection may reveal cracks, corrosion, worn pivot points, or a seized damper mechanism on the tensioner assembly.
-
Belt Slippage or Misalignment
A failing tensioner damper can no longer maintain consistent belt tension, causing the belt to slip off-track, ride unevenly on pulleys, or come off entirely.
-
Accessory Malfunction
When the belt slips due to poor tensioner function, engine-driven accessories such as the alternator, power steering pump, or air conditioning compressor may operate erratically or fail.
-
Excessive Belt Vibration
A worn damper loses its ability to absorb oscillations, causing the belt to visibly flutter or vibrate at idle or under load, which accelerates belt and pulley wear.
Періодичність заміни
No fixed replacement mileage is published by Volkswagen Group for the 03H145299B. Replace on condition — at any sign of noise, wear, or belt misalignment — or proactively when performing accessory belt service on high-mileage vehicles.
Часті запитання
What vehicles does the 03H145299B belt tensioner damper fit?
This part fits Volkswagen Touareg (2007–2009, 3.6L V6), Porsche Cayenne (2004–2014, 3.2L and 3.6L V6), and Audi Q7 (2007 and 2010, 3.6L V6). Always verify your engine code and chassis number before ordering, as fitment can vary within the same model year.
Is 03H145299B an OEM part or aftermarket?
03H145299B is the genuine OEM Volkswagen Group part number, catalogued across VW, Audi, Porsche, SEAT, and Škoda. Reputable aftermarket equivalents include FEBI BILSTEIN 33716, SWAG 30 93 3716, TOPRAN 111 483, and TRUCKTEC AUTOMOTIVE 07.19.201.
Has this part number been superseded?
Some sources indicate that for certain applications — particularly 2008 Volkswagen Touareg models — additional or alternative components such as idler pulley 022-145-276A and water pump pulley 021-121-031D may be required alongside or instead of the original tensioner. Confirm the current active part number with a VW/Audi dealer using your VIN before ordering.
Should I replace the accessory belt at the same time as the tensioner damper?
Yes, it is strongly recommended. Since accessing the tensioner requires belt removal, replacing the belt simultaneously saves labor cost and ensures the entire system is renewed together. A worn belt on a new tensioner — or vice versa — reduces the benefit of the repair.
What is the difference between a belt tensioner and a belt tensioner damper?
A standard belt tensioner maintains constant pressure on the accessory belt via a spring-loaded arm. The damper component specifically absorbs oscillations and vibrations that occur during engine operation, preventing belt flutter and reducing stress on pulleys and the belt itself. The 03H145299B serves the damper function within the tensioner assembly.
Can I replace this part myself, or should I take it to a shop?
A competent DIYer with basic hand tools, a torque wrench, and access to the vehicle's service manual can perform this replacement. However, correct torque values for the mounting bolt are essential and must be sourced from the official service manual. If you are unsure of the belt routing or torque specs, professional installation is recommended.
Знайшли помилку?
Допоможіть нам стати кращими — якщо ви помітили помилку на сайті або в даних, повідомте нас, і ми виправимо її якнайшвидше.